150 evacuated, 13 hospitalized at packaging plant

A malfunctioning propane forklift caused elevated carbon monoxide at a Wisconsin packaging plant. About 150 workers were evacuated.

What happened

Just after 12:45 p.m. on Monday, June 8, 2026, emergency crews were called to a plastics and shrink-wrapping plant in Fort Atkinson, Wisconsin, after six employees felt sick with symptoms consistent with carbon monoxide exposure.

Firefighters found elevated CO levels, evacuated about 150 employees and shut off gas and electric service to the building as a precaution. Thirteen employees were taken to hospitals with non-life-threatening injuries. Investigators traced the CO to a malfunctioning propane-powered forklift inside the facility, according to WMTV 15 News.

How could this have been prevented?

All propane forklifts give off CO, and one that's out of tune or needs repair can give off much more. OSHA's forklift standard requires operator training on enclosed areas where poor ventilation or poor maintenance can cause CO to build up. Regular tune-ups, good airflow through the building and switching to electric forklifts where practical are the main ways to keep CO levels down.

Here, the employees themselves were the warning system. They felt sick, knew something was wrong and called 911, and the fire chief praised them for acting early. But by then CO had already reached them. OSHA advises employers to test the air regularly where CO may be present and to give workers monitors with audible alarms. A detector on the wall that shows the CO level can reveal a forklift problem before anyone feels it.

How a Pro-Tech 8505 helps

Its display shows the CO level from 9 ppm, so carbon monoxide that's starting to build is visible before it reaches an alarm level. It records the peak reading, how long the peak lasted and how long ago it happened, down to days, hours and minutes, stores 30 days of history and shows the 8-hour time-weighted average. Alarm points follow ACGIH, NIOSH, OSHA and Cal/OSHA workplace exposure limits, from 20 ppm over 7 hours up to an immediate alarm at 180 ppm, with an 85 dB horn and a flashing red light. It runs on a 9V battery and mounts on any interior wall with no wiring.

See the Pro-Tech 8505 commercial CO detector

Source: WMTV 15 News. Summary written by COdetectors.com.
Safety guidance: OSHA: Powered Industrial Trucks, 29 CFR 1910.178 and OSHA: Carbon Monoxide Poisoning fact sheet